Appendix
114
*1
Measurement conditions: With paper tray, Bypass Tray and output tray extension
closed.
❖ Weight:
Approximately 20 kg (44.1 lb.) (toner cartridge and power cable included)
❖ Warm-up Time:
Less than 19 seconds (23°C, 73F)
❖ Paper Capacity:
*1
Paper weight: 60 - 105 g/m
2
(16 - 28 lb.)
*2
You can load up to 10 envelopes (55 - 157 g/m
2
, 14 - 42 lb.) at the same time.
*3
To use the envelope feeder unit, the optional paper feed unit is required. The pa-
per tray of the feed unit can be replaced with the envelope feeder unit.
*4
For more information about envelopes, see p.12 “Envelopes”.
❖ Paper Output Capacity:
250 sheets (80 g/m
2
, 20 lb.)
❖ Memory:
Standard 128 MB, up to 256 MB (with the optional memory unit)
❖ Network:
Topology: Ethernet (10BaseT/100BaseTX)
Protocol: TCP/IP, NetBEUI, IPX/SPX, AppleTalk
❖ Optional Equipment:
• Paper Feed Unit Type 610
• Envelope Feeder Type 610
• Duplex Unit AD610
• Memory Unit Type C 256MB
• Hard Disk Drive Type 2600
• 1394 Interface Unit Type 4510
• 802.11b Interface Unit Type F
With one optional
feed unit
478 mm (18.4 inch-
es)
437 mm (17.2 inch-
es)
473 mm (18.6 inch-
es)
With two optional
feed units
478 mm (18.4 inch-
es)
437 mm (17.2 inch-
es)
603 mm (23.7 inch-
es)
Standard paper tray
500 sheets
*1
(80 g/m
2
, 20 lb.)
Bypass Tray
*2
100 sheets
*1
(80 g/m
2
, 20 lb.)
Optional Paper Feed Unit × 2
500 sheets × 2
*1
(80 g/m
2
, 20 lb.)
Optional Envelope Feeder
*3
60 envelopes
*4
Width Depth Height
