172
BLoading Paper
Reference
Regarding paper sizes that can be set, ☛ see page 238.
Note
❐ If you want to change the paper size, ☛ see page 184.
Non-recommended Paper for Paper Trays
❐ Folded, curled, creased, or damaged paper
❐ Torn paper
❐ Perforated paper
❐ Paper with conductive or low electrical resistance coating such as carbon or silver coating
❐ Thermal paper, art paper
❐ Thin paper that has low stiffness
❐ Damp paper
❐ Wavy paper
❐ Stapled paper
❐ Translucent paper
❐ OHP transparencies
Note
❐ Load paper with the side you wish to copy onto face-down in the paper trays. If copies are curled, try turning the copy
paper over in the tray. If there is no improvement, change to copy paper with less curl.
❐ Correct curls in copy paper before loading.
❐ Fan copy paper to get air between the sheets before loading.
❐ When making 2-sided copies, do not load paper in the paper tray to copy on the reverse side. Use the bypass tray.
☛ See page 52.
Loading Paper in the Paper Tray
1
Pull out the paper tray until it stops.
2
While pressing the lock lever, open the side
fences.
BLoading Paper
