Settings You Can Change with User Tools
143
6
❒ [With Image Rotation] Use to copy
when using the Auto Tray
Switching function.
1.
Original
2.
Paper (Tray 1)
3.
Paper (Tray 2)
4.
Paper (Tray 3)
❒ [Without Image Rotation] Only
copies with Auto Tray Switch-
ing if you load paper of the
same size and in the same orien-
tation in two or more trays. If
the paper is not the same size or
in the same orientation, copying
is interrupted and the message
“
Load paper.
” is displayed.
1.
Original
2.
Paper (Tray 1)
3.
Paper (Tray 2)
4.
Paper (Tray 3)
❒ [Off] When a paper tray runs out
of paper, copying is interrupted
and the message “
Load pa-
per.
” is displayed.
General Features P.
2
/
6
❖
❖❖
❖ Duplex Mode Priority
You can select the type of the Du-
plex function effective when the
power is turned on, or modes are
cleared.
Note
❒ Default: 1 Sided
→
1 Sided
❖
❖❖
❖ Copy Orientation in Duplex Mode
You can set the copy orientation
when making two-sided copies.
Note
❒ Default: Top to Top
❖
❖❖
❖ Original Orientation in Duplex Mode
You can set the original orientation
when making two-sided copies.
Note
❒ Default: Top to Top
❖
❖❖
❖ Change Initial Mode
You can select standard mode or
Program No.10 as the mode effec-
tive when power is turned on, or
modes are cleared.
Note
❒ Default: Standard
❖
❖❖
❖ Max. Copy Quantity
The maximum copy quantity can
be set between 1 and 999.
Note
❒ Default: 999 Sheets
❖
❖❖
❖ Tone: Original Remains
The beeper (key tone) sounds if
you forget to remove originals af-
ter copying.
ZGVX020E
ZGVX030E
VenusC1_GB_Copy_F1_FM.book Page 143 Tuesday, January 17, 2006 3:43 PM
