Printer Features Parameters
35
3
❖
❖❖
❖ Ext. A4 Width
You can extend the printing area
width (when printing on A4 sheet
with PCL).
• Off
• On
Note
❒ Default: Off
❒ When the setting is On, the
width will be 8/ inches.
❖
❖❖
❖ Append CR to LF
By connecting to a host operating
system such as UNIX and setting
this to on, a carriage return follows
each line feed: CR=CR, LF=CR-LF,
FF=CR-FF.
• Off
• On
Note
❒ Default: Off
❖
❖❖
❖ Resolution
You can set the print resolution in
dots per inch.
• 300 dpi
• 600 dpi
Note
❒ Default: 600 dpi
PS Menu
❖
❖❖
❖ Data Format
You can select a data format.
• Binary
• TBCP
Limitation
❒ This setting is not effective
when operating the machine
with a parallel, USB, or
EtherTalk connection.
❒ When operating the machine
with a parallel or USB connec-
tion, if binary data is sent from
the printer driver, the print job
is canceled.
❒ When operating the machine
with an Ethernet connection,
the print job is canceled under
the following conditions;
• The printer driver data for-
mat is TBCP, and the data
format selected on the dis-
play panel is Binary.
• The printer driver data for-
mat is binary, and the data
format selected on the dis-
play panel is TBCP.
Note
❒ Default: Binary
❖
❖❖
❖ Resolution
You can set the print resolution in
dots per inch.
• 300 dpi
• 600 dpi
Note
❒ Default: 600 dpi
