A SERVICE OF

logo

ASSEMBLY
Your new tiller has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To
ensure safe and proper operation of your tiller all parts and hardware you assemble must be tightened securely. Use the correct
tools as necessary to insure proper tightness.
TOOLS REQUIRED FOR ASSEMBLY
A socket wrench set will make assembly easier. Standard
wrench sizes are listed.
(1) Utility knife
(1) Screwdriver
(2) 1/2" wrenches
OPERATOR'S POSITION (See Fig. 1)
When right orlefthand ismentioned inthis manual, itmeans
when you are in theoperating position(standing behindtiller
handles).
LEFT
FRONT
RIGHT
OPERATOR'S
POSITION
FIG. 1
(2) Hex Bolts 5/16-18 x 3/4
(2) Hex Bolts 5/16-18 x 1-1/4
CONTENTS OF HARDWARE PACK
iiiiiWiiltllltlilill
_ ..................
(2) Hex Bolts 5/16-18 x 1
©
(6) Lock Washers 5/16
(4) Washers 3/8 x 7/8 x 14
©
(6) Hex Nuts 5/16-18
4