HD3000 User’s Guide 47
HD3000 User’s Guide
Professional Video Scaler and Color Management System
Color Vividness
The HD3000 includes 3 preset color management settings and one user definable setting.
You can easily switch between the modes to achieve different effects.
1. Use “h”, “i” arrow keys to select the “Color Vividness” adjustment item, press “Enter” key
or “g” key to enter this adjustment item. The Menu disappears and a small adjustment bar
is shown (as shown below).
IMAGE
IMAGE
I
ADVANCED
Select Enter
Enter Menu
Back
Noise Reduction
Gamma
Color Temp
Image Mode
Edge Enhancement
Color Vividness
B/W Extension
Demo
Reset
0
1
Warm
Film
Off
Off
Off
Off
DISPLAY
SYSTEM
SETUP
2. Use “f”, “g” arrow keys to select default modes.
3. For User mode adjustment, put cursor on “User”, press “Enter” key to enter this
adjustment item. The Menu disappears and a sub adjustment menu is shown (as shown
below).
Color Vividness Off 1 2 3 User
4. Use “h”, “i” arrow keys to select the desired adjustment item, press “f”, “g” arrow keys
to adjust image.
5. User can select and setup their favorite settings on “User” and adjust submenu shows
as the following. (Please refer to the following description and graphic about Saturation and
Hue adjustment details.)
1) Choose a color (Green, Blue, Cyan, Yellow, Magenta and Red) and move to “Saturation” or
“Hue” to fine-tune.
2) Enter “Saturation” to adjust “level” (brightness level) on Lengthwise gradation from level 0
to 15, and then adjust the value of Saturation from -100 to 100 in accordance with each
level selected.
