A SERVICE OF

logo

Set up your phone
Copyright © 2004 Nokia. All rights reserved. 17
1. Remove the back cover as
described on page 15.
2. To remove the front cover, gently
pull the top of the cover from the
phone (1) and lift the cover.
3. Remove the old cut-out cover
from the back cover and the old
cut-out cover and keymat from
the front cover.
4. Place the new cut-out cover on
the front cover (2).
5. Place the keymat on the cut-out
cover (3). Make sure that the
keymat is properly in place.
6. To replace the front cover, align
the top of the phone with the top
of the cover (4) and press the
bottom of the phone towards the
cover until it locks into place (5).
7. Place the cut-out cover into the
back cover by sliding the cut-out
cover under the two guides in the
middle and at the bottom of the
back cover (6).
8. Replace the back cover as
described in step 6 in ”Installing
the UIM card and the battery” on
page 15. Make sure that the back
cover is properly in place.