A SERVICE OF

logo

Open as PDF
next previous
VHF NX2000 English
29
Press (MENU) key to select the “POSITION/UTC” screen as below:
Use the numeric key to enter the required data, then press (ENT) key to accept the
position and time entered.
After 23 hours, if the Radio has not received any position data either manually or from
the NMEA input, then the position data will disappear from the screen, and it will show
“NO POSITION”.
10.4 Set Work Channel
The Radio includes a list of 9 working channels, which can be scrolled through when
using the routine group calling. The first four channels are preset as 06, 08, 72 and 77.
These cannot be amended. The remaining five channels are programmable. Always
consult your local authority requirements when choosing suitable working channels.
Find out which channels are duplex as these do not allow ship-to-ship communication.
Press (MENU) key to select the WORK CHANNEL screen as below: