A SERVICE OF

logo

English VHF NX2000
20
Press the (ENT) key again to make the call, or press (CLR) to cancel. When the call is
sent, the Radio will be set to the working channel 16.
7.4 Group Call
If a group ID has been set up for the called Radio. A call can be made to other
members of the group.
Press the (CALL) key on the keypad to select the GROUP CALL screen as below:
Select a working channel from the channel list by pressing the or key on the
keypad.
Press (ENT) key to send the call. Allow a few seconds for the other members of the
group to reach their Radios (all VHF Radios in the group should automatically switch to
selected working channel upon acknowledgement), then make a normal voice call.