Sample Configurations
Sample RAID Configuration
NCR S10 Desktop Server User Guide C-17
• Available IRQ settings are 3, 4 ,5, 7, 9, 10, 11, 14,
and 15.
• To make IRQ 3 available for selection, you must
disable Serial Port 2 in the System Security
menu.
• To make IRQ 4 available for selection, you must
disable Serial Port 1 in the System Security
menu.
• To make IRQ 7 available for selection, you must
disable Parallel Port 1 in the System Security
menu.
3.
Make the following settings:
• Set PCI IRQ Setting to Manual.
• Set PCI slot 1 (PCI Ethernet Adapter
SMC8432BTA) to IRQ5.
• Set PCI slot 2 (PCI Token Ring Adapter Olicom
OC-3136) to IRQ 14.
• Set PCI slot 3 (Mylex PCI RAID Adapter) to IRQ
15.
• Set the On Board SCSI to IRQ 11.
• Set the VGA Palette Snoop to Disabled.
• Set the On Board SCSI AIC-7870 to Enabled.
• Set the Boot Drive to Enabled.
