Using the System Utilities
Using the EISA Configuration Utility
5-18 NCR S10 Desktop Server User Guide
Starting the ECU From a Fixed Disk
Although we recommend that you start this utility from
the System Configuration diskette, you can start the
utility from your fixed disk if you have MS-DOS
installed on it.
Installing the Utility on a Fixed Disk
You must copy the utility files to your fixed disk before
you can start the utility.
To copy the files, insert the System Configuration
diskette in drive A and type “copy a:*.* [d:][path]” where
d: is the fixed drive that contains the utility files and
path is the path on the fixed drive that contains the
utility files.
Starting the Utility
To run the utility, type
“[d:][path]SD[/B][/H][/K][/M][/A]” and press [Enter].
Items in brackets are optional and only the information
within the brackets is entered.
Options
