8
PROTECTING YOURSELF WHILE ON THE PREMISES
Bypassing Interior Zones
Interior Zones, when bypassed, allow free movement within the premises while
the protection of armed perimeter zones is maintained. If the E button is
pressed, all Interior Zones will be bypassed upon arming. Some control panels
have provisions for two groups of Interior Zones.
Enter your code, then press the Jbutton. The red ARMED light will come on
and the green STATUS light will blink, indicating zones bypassed. After the exit
time has elapsed, the BYPASS and INTERIOR arrows will display in the window.
Instant Protection
When retiring for the evening, after everyone is at home, you will probably want
to cancel the entry delay on the Entry Zone(s). Then, if armed, opening the entry
door will cause an instant alarm. (When arming, exit delay will remain in effect.)
To cancel the entry delay while on the premises, merely press the F button.
(it may be pressed either before or after arming.)
Note: While armed, the red ARMED light will flicker rapidly to indicate instant
protection.
INTERIOR
BYPASSFIRE/TBL
GEM-RP3DGTL.pub
page 8
Wednesday, August 18, 1999 14:03
