A SERVICE OF

logo

3-22
KT3 Ultra2-C ATX Mainboard
MS-6712 ATX Mainboard
PCI Latency Timer
This item controls how long each PCI device can hold the bus before another
takes over. When set to higher values, every PCI device can conduct transac-
tions for a longer time and thus improve the effective PCI bandwidth. For
better PCI performance, you should set the item to higher values. Settings
range from 32 to 248 at a 32 increment.
PCI IDE BusMaster
Set this option to Enabled to specify that the IDE controller on the PCI local
bus has bus mastering capability. Settings options: Disabled, Enabled.
Primary Graphics Adaptor
This setting specifies which VGA card is your primary graphics adapter. Set-
ting options: PCI, AGP.
PCI Slot1 IRQ, PCI Slot2/5 IRQ, PCI Slot3/6 IRQ, PCI Slot4 IRQ
These items specify the IRQ line for each PCI slot. Setting options: 3, 4, 5, 7,
9, 10, 11, Auto. Selecting Auto allows BIOS to automatically determine the
IRQ line for each PCI slot.