A SERVICE OF

logo

Chapter 3
3-26
IRQ Activity Monitoring
888
RTC Alarm Resume
This is to enable or disable the feature of booting up the system on a
scheduled time/date. Settings: Enabled and Disabled.
Date (of Month)
Specifies the date for RTC Alarm Resume. Settings are 0~31.
Resume Time (hh:mm:ss)
Specifies the time for RTC Alarm Resume. Format is <hour><minute>
<second>.
IRQs Activity Monitoring
Press <Enter> to enter the sub-menu and the following screen appears:
Primary INTR
When this is set to ON, any event occurring will wake up the system
which has been powered down.
IRQ3~IRQ15
Enables or disables the monitoring of the specified IRQ line. If set to
Enabled, the activity of the specified IRQ line will prevent the system
Note: To use the function of “Wake Up On LAN/Ring”, you need to
install a modem/LAN card supporting power on function.