A SERVICE OF

logo

3-7
BIOS Setup
[Cylinder] Number of cylinders.
[Head] Number of heads.
[Precomp] Write precompensation.
[Landing Zone] Cylinder location of the landing zone.
[Sector] Number of sectors.
Halt On
The setting determines whether the system will stop if an error is detected at boot.
Available options are:
[All Errors] The system stops when any error is detected.
[Disabled] The system doesnt stop for any detected error.
[All, But Keyboard] The system doesnt stop for a keyboard error.
[All, But Diskette] The system doesnt stop for a disk error.
[All, But Disk/Key] The system doesnt stop for either a disk or a key-
board error.
Base/Extended/Total Memory
The three items show the memory status of your system (read only).