5360 IP Phone – User Guide
- 79 -
DECT Cordless Module and Accessories on a 5360 IP Phone
Rear View of 5360 IP Phone
Elements of Your Cordless Module and Accessories
Feature Function
1) Cordless Module (either DECT or
Bluetooth)
Attached to the back of the phone, the module contains a
Light Emitting Diode (LED) indicating that a cordless device
is in use; also indicates the state of pairing between the
module and a cordless device.
2) Cordless Headset (photo shows
DECT headset)
Cordless handsfree operation for calls. If you are using a
cordless headset, you do not need to use the handset.
3) Cordless Headset Charging Cradle
(DECT only)
Provides power to recharge the cordless headset battery.
(Not available for Bluetooth headsets.)
4) Cordless Handset Charging Plate Provides power to recharge the cordless handset battery.
Replaces the handset cradle plate supplied with the phone
for corded handsets.
5) Cordless Handset Cordless operation for handset calls. (You can transfer from
the phone handset to the cordless headset at any time.)
6) Cordless Module Pairing Button Initiates pairing between the Cordless Module and a
cordless accessory.
7) Cordless Headset Cradle Cable
(DECT only)
Connects to the Cordless Module to provide power to the
charging cradle.
