5360 IP Phone – User Guide
- 92 -
USING THE CORDLESS DEVICES APPLICATION
The Cordless Devices Application provides access to module information and pairing for
handsets or headsets.
To access the Cordless Devices Application, do one of the following:
Press the blue Applications key
, and then press Cordless Devices.
Press a feature key you have programmed as the Cordless Devices Application key.
Note: When the pairing button on the Cordless Module is pressed, or when the battery
level of a Mitel-branded cordless accessory is critically low, the phone will automatically
open the Cordless Devices Application.
Low Battery Level
When the battery of a Mitel cordless device reaches a near-critical level, the phone displays a
warning. Until the battery is recharged (or until it becomes fully discharged), the warning is
repeated at each new call made using the Prime Line. To continue with a call while charging
the cordless accessory, switch to speakerphone and then cradle the cordless accessory.
Viewing Cordless Module Information
You can use the Cordless Devices Application to view protocol, firmware, and hardware
information about the Cordless Module attached to your phone.
To view Cordless Module information:
1. Access the Cordless Devices Application.
2. Press Cordless Module Info or Bluetooth Module Info. Device information appears on
the screen.
3. Press Close to exit.
