How to activate Auto heat-up
^
While a 0 is lit up in the cooking zone
display, touch the - sensor until the
required continued cooking power
level appears, e.g. 3.
The 12 curved lines show in the
light-ring during the Auto heat-up time.
After the Auto heat-up time has
finished, only the number of curved
lines, for the relevant continued
cooking power level which has been
chosen, show in the light-ring.
Example:
during the Auto heat-up time:
during the continued cooking time:
At any point during the Auto heat-up
time you can use - or + to lower or
increase the continued cooking power
level. The Auto heat-up time will alter
accordingly.
Cooking without Auto heat-up
Proceed as follows:
^
Switch the cooking zone on by
touching the + sensor until the
continued cooking power level you
require appears in the in the display,
e.g. 4.
The same number of curved lines will
show in the light-ring, i.e. if power level
4 is selected, four segments will light
up.
Use
23
