30
Playback (Basic operation)
Setup (vpage23)
n Turning the power on (vpage30)
n Selecting the input source (vpage30)
n Adjusting the master volume (vpage31)
n Turning o the sound temporarily (vpage31)
n Playing a Blu-ray Disc player/DVD player
(vpage31)
n Playing a CD player (vpage31)
n Playing an iPod (vpage32)
n Playing a USB memory device (vpage35)
n Listening to FM/AM broadcasts (vpage38)
n Listening to Internet Radio (vpage47)
n Playing back files stored on a PC and NAS
(vpage50)
n Using online services (vpage54)
n Convenient functions (vpage65)
n AirPlay function (vpage70)
Selecting a listening mode (Sound Mode)
(vpage72)
Playback (Advanced operation) (vpage83)
Important information
Before starting playback, make the connections between the dierent
devices and the settings on the unit.
NOTE
Also refer to the operating instructions of the connected devices
when playing them.
Turning the power on
Press POWER X to turn on power to
the unit.
You can also switch the power to standby by pressing X on the main
unit.
n When power is switched to standby
Press POWER X.
GPower indicator status in standby modeH
Normal standby : Red
•When “HDMI Pass Through” or “HDMI Control” (vpage100)
is set to “On” : Orange
•When “IP Control” (vpage 111) is set to “Always On” :
Orange
Selecting the input source
Press the input source select button
(CBL/SAT, GAME, Blu-ray/DVD,
MEDIA PLAYER, AUX, TUNER, TV
AUDIO
, M-XPort, CD, NETWORK,
iPod/USB or INTERNET RADIO) to
be played back.
The desired input source can be selected
directly.
You can also use the following operation to select an input
source.
n Select the input source using the main unit
Turn INPUT SELECTOR.
•Turning INPUT SELECTOR switches the input source, as shown
below.
GAME AUX
MEDIA
PLAYER
iPod/USBTUNERNETWORK CDTV AUDIO
M-XPort
Blu-ray/DVDCBL/SAT
