Appendix C System Configuration – Pocket PC 2000 111
E-EQ-MX5PCRG-F-ARC MX5 Reference Guide
Cisco Client
Access: the Windows icon | Programs | Cisco
Note: Online help is not available for this option.
Tap OK to return to the Programs options.
Aironet Client Utility
Factory Default Settings Other Options
SSID Blank
Client Name Blank
Infrastructure Mode Yes No
Power Save Mode Fast PSP CAM, PSP
WEP Disabled Enabled
Authentication Types Open Shared Key
LEAP Disabled Enabled
Mixed Mode Disabled Enabled
World Mode Disabled Enabled
Data Rates Auto 1, 2, 5.5, 11 Mb Only
Transmit Power MAX 20mw, 50mw, 100mw
SSID
Identifies the 802.11B wireless network the station will connect to. It can be up to 32 characters
long. The SSID is case sensitive.
Default: “”
Note: Setting this value to “” will enable the station to connect to any IEEE 802.11b network.
Client Name
This is the station name that is displayed in the table of connected devices on the Access Point. It
provides a logical name of up to 16 characters. Client Name is not case sensitive.
Default: “”
Infrastructure Mode
Setting this parameter to ‘Yes’ allows the client to set up a connection to a wired network. Setting
this parameter to “No” allows the client to set up an Ad Hoc or temporary network connection
between two or more computers.
Valid: Yes, No
Default: Yes
PowerSaveMode
Select Constant Awake Mode (CAM) for devices where constant availability is desired e.g.
desktop computers where power saving is not an issue.
Select Fast PSP when using battery power only. Fast PSP causes the Access Point to buffer
incoming messages. Fast PSP will temporarily switch to CAM mode to receive the packets and
once the packets are retrieved, it switches back to PSP mode.
Valid: CAM, Fast PSP
Default: CAM
