A SERVICE OF

logo

Interpreting the LCD Screen
Interpreting the LCD Screen
The charge/analyze pocket utilizes an LCD screen to display the status of the charge or analyze operation. The LCD screenis
located to the right of the single charge/analyze pocket. Additional informationmay be displayed including voltage, capacity
and battery fault information, as appropriate.
Charge Only
When a battery is in the charge/analyze pocket and the analyze dome switch (highlighted by the word "press" in yellow) has
not been pressed, the battery is charged only. The charge process requires less than4 hours.
The LCD indicates a rounded off version of voltage and:
l CHARGE is displayedon the screen.
l The battery is charging.
l The battery voltage undercharge(7.2V). The voltage can vary from 4.6V to 8.5V.
E-EQ-MX7CHGROG-E-ARC [ 8 ] MX7 Battery Multi-Charger/AnalyzerUser Guide