A SERVICE OF

logo

A-61003 September 1993FB-2
LOADING FILM
INTO A CASSETTE
IMPORTANT: Always load and unload film in subdued,
indirect light to help prevent "fogging".
The following steps are required to load film into the
cassette(s):
1. Select the correct film for your application(s) and
appropriate cassette(s).
2. Check the cassette display before loading a new roll of film:
• Verify that the film supply indicator shows that the
cassette is empty.
• Verify that there is not a low battery symbol. If a low
battery symbol appears, or the display is not visible,
replace the battery.
3. Place the cassette on a flat surface, with the top cover
side up.
4. Press down on the cover latch and turn counterclockwise
to unlock the top cover.
5. Remove the top cover and set it aside.