To set oven to start cleaning at at later time:
An automatic program of 3 hours is pre-set for an average soiled oven. For a heavily
soiled oven, program can be extended up to 4 hours.
a. For an average soiled oven: Push SELF-CLEAN button.
For a heavily soiled oven: Push SELF-CLEAN button. Turn SET dial to 4:00.
b. Push STOP TIME button. Turn SET dial to time of day desired for clean cycle to
end. The start time will be calculated.
NOTE: To prevent accidentally changing the cleaning cycle, p.ush TIMER button to
return to time of day.
6. The cleaning process begins immediately unless the self-cleaning process has been
set for a delayed start When the oven temperature reaches 550°F, the LOCK
INDICATOR LIGHT will glow and the door cannot be opened until the temperature
drops below 550° F. DO NOT TRY TO UNLOCK THE DOOR WHILE LOCK INDI-
CATOR LIGHT IS ON. The normal cleaning process takes the time selected on the
clock plus about 45 minutes for the oven to cool down before the LOCK INDICA-
TOR LIGHT goes out and the door can be opened.
7. After the LOCK INDICATOR LIGHT goes out, move the DOOR LOCK LEVER to the
left. The oven door can now be opened.
8. Turn the SELECTOR AND THERMOSTAT knobs from CLEAN to OFF after the
door is unlocked.
To stolD cleaning process before lock indicator light comes on:
1. Move the DOOR LOCK LEVER to the left.
2. Turn SELECTOR and THERMOSTAT knobs from CLEAN to OFF.
3. Push SELF-CLEAN button.
To stop cleaning process after lock indicator light comes on:
1. Push SELF-CLEAN button.
2. Leave the THERMOSTAT and SELECTOR knobs in the CLEAN position.
3. Allow oven to cool until the LOCK INDICATOR LIGHT goes out. This may take up to
45 minutes, depending on how long the oven has been on.
4. After LOCK INDICATOR LIGHT goes off, move the DOOR LOCK LEVER to the left.
5. Turn SELECTOR and THERMOSTAT knobs from CLEAN to OFF.
2O
