1. If you require an additional manual, please contact Jancy Engineering at (563) 391-1300 for a FREE copy.
2. Never place hands, fingers, gloves or clothing near cutting area or rotating machine parts.
3. Always disconnect machine from power source before changing inserts, clearing chips, or performing adjustments.
4. Keep all safety features functioning and working properly.
5. Never wear loose clothing, gloves or jewelry when working near cutting area or rotating machine parts.
6. Always use eye and hearing protection.
7. Always use proper tooling. Keep inserts securely fastened.
8. Do not use dull or broken inserts.
9. To reduce the risk of electrical shock, do not use machine in wet or damp areas.
10. Do not remove or alter electrical panels. Use only authorized service centers for repairs.
WARNING!
DO NOT OPERATE MACHINE IF WARNING AND/OR INSTRUCTION LABELS ARE MISSING OR DAMAGED.
CONTACT JANCY ENGINEERING FOR REPLACEMENT LABELS.
SPECIAL INSTRUCTIONS
5
