2040 LCD panel, LCD cable, and hinges
For access, remove these FRUs in order:
• “1010 Battery pack” on page 50
• “1020 Bottom slot cover” on page 51
• “1040 Hard disk drive or solid state drive assembly” on page 53
• “1070 Keyboard” on page 57
• “1090 Top case assembly” on page 60
• “1130 System board assembly, fan assembly, and backup battery” on page 65
• “2010 LCD unit” on page 71
• “2020 LCD bezel assembly” on page 73
• “2030 Integrated camera” on page 74
Table 30. Removal steps of LCD panel and LCD cable
Step Screw (quantity) Color
Torque
1
M1.7 × 3 mm, wafer-head, nylon-coated (4) Silver
0.181 Nm
(1.85 kgfcm)
When installing: Make sure that the LCD connector is attached rmly.
Chapter 8. Removing and replacing a FRU 75
