Table 27. Removal steps of LCD unit (continued)
When installing: Make sure that the connector is attached rmly to the system board.
2020 LCD bezel assembly
For access, remove these FRUs in order:
• “1010 Battery pack” on page 50
• “1020 Bottom slot cover” on page 51
• “1040 Hard disk drive or solid state drive assembly” on page 53
• “1070 Keyboard” on page 57
• “1090 Top case assembly” on page 60
• “1130 System board assembly, fan assembly, and backup battery” on page 65
• “2010 LCD unit” on page 71
Table 28. Removal steps of LCD bezel assembly
Step Screw cap Screw (quantity) Color
Torque
1
M2 × 4 mm, wafer-head, nylon-coated (4)
Black 0.181 Nm
(1.85 kgfcm)
Chapter 8. Removing and replacing a FRU 73
