CHAPTER 3 STARTING AND STOPPING
User's Manual U13502EJ2V0UM00
30
3.2 STARTING THE APPLICATION
This section explains how to start the application program.
•
Connection of each unit and applying power
For connection of each unit, see
Section 2.3
.
After completing connections, turn on power to the PG-FP3. When the PG-FP3 is operating normally, the
POWER LED lights, the LED on the side of the MODE key blinks, and then the Erase, Program, and Verify LED
indicators light.
Photo 3-1. Starting the PG-FP3
If any of the LEDs mentioned above does not light, the PG-FP3 has probably malfunctioned. If this occurs,
notify NEC.
•
Starting FLASHPRO3
Either select FLASHPRO3 from the Start menu or, if a shortcut has been created, double-click the shortcut to
start FLASHPRO3. If FLASHPRO3 starts correctly, the following screen is displayed.
