IBM TotalStorage DR550 SMB Version 1.0 ------ 27 May 2005 Page 25
IBM Storage Systems Copyright © 2005 by International Business Machines Corporation
The following table shows the IP addresses associated with the server, storage and customer
network. Please note that some addresses may need to be changed while others should not be
changed.
IP Address IP Description Device Configuration Need?
DRS_Engine_1
192.168.1.5 drs_engine AIX To be changed
Preconfigured TCP/IP addresses for gigabit Ethernet network
Connecting to a 10/100/1000 Mbps Ethernet (copper) Network
To connect to a 10/100/1000 Mbps Ethernet network (or 10/100 network), the following diagram
shows how the DR550 is configured at the factory.
Single Node - Disk and Tape Ready
10/100/1000 (Copper) Ethernet / IP Connectivity
10/100/1000 EN Switch #1
(customer's network)
10/100/1000 (T6)
HMC1
HMC2
System
board
10/100/1000 (T5)
USB0 (T7)
USB1 (T8)
Pwr GXT135p Graphics
Adapter - Slot 2
The following table shows the IP addresses associated with the server, storage and customer
network. Please note that some addresses may need to be changed while others should not be
changed.
IP Address IP Description Device Configuration Need?
DRS_Engine
192.168.1.5 drs_engine AIX To be changed
Preconfigured TCP/IP addresses for 10/100/1000t Ethernet networks
Important: Make sure to use the correct adapter(s) and port(s) on the IBM eServer p5 520 server(s)
when connecting to your network; check the interface(s) during configuration. Do not connect the
IBM TotalStorage DR550 SMB to your network if you already use the factory IP addresses for any
other device within your network environment.
