IBM TotalStorage DR550 SMB Version 1.0 ------ 27 May 2005 Page 19
IBM Storage Systems Copyright © 2005 by International Business Machines Corporation
Setting up the Management Console
DR550 SMB includes an integrated management console. Connections are made through the
Netbay LCM (Local Console Manager). To interact with the system software interfaces or to run
diagnostics from a DVD-RAM, it is necessary to use the integrated console.
Changing Server Names
You may normally press either the Print Screen key or press the Control key twice to access the
OSCAR
® (On Screen Configuration and Activity Reporting) interface. To modify the server name on
OSCAR, press Print Screen and then click Setup – Names – Modify to access the screen that
displays the old name and prompts you to add a new name. Enter a new server name and click OK
in the Modify screen; then click OK again in the Names screen., If you do not do this the system will
be in a suspended state until you press the Print Screen twice.
Using the Num Lock key and the keypad in OSCAR to soft switch to servers by port number will
only work when you first set the Num Lock key for a server. For example, when you set Num Lock
on server A, the soft switch to server B and then back to Server A, the LED light on your keyboard
will be lit, but Num Lock will no longer be activated for Server A. You can resolve this by pressing
Num Lock twice to reset, or avoid it by either using your mouse or the number set on the main part
of your keyboard to switch to a different server.
The following diagrams show the connections made in the factory for the DR550 SMB configuration.
