1918
Recommendations for Users
Before using these products, make sure that they are entirely suitable for the environ-
ment in which they are used.
Operation of these instruments in residential areas could cause unacceptable interfer-
ences to radio and TV equipment.
The metal band at the end of the probe is sensitive to electrostatic discharges. Avoid
touching this metal band at all times. During calibration ESD wrist straps should be worn
to avoid possible damage to the probe by electrostatic discharge.
Any variation introduced by the user to the supplied equipment may degrade the
instruments' EMC performance.
To avoid electrical shock, do not use these instruments when voltages at the measure-
ment surface exceed 24 Vac or 60 Vdc.
To avoid damages or burns, do not perform any measurement in microwave ovens.
In particular cases the meters could turn off. Simply press the ON/OFF key to turn on.
CE DECLARATION OF CONFORMITY