AP-4
Appendix2 DAILY CARE
■ Cleaning Materials
For details about the cleaning materials, contact the
FUJITSU scanner dealer where you purchased the scan-
ner.
■ Cleaning Method
The ADF must be cleaned with a lint-free cloth moist-
ened with the Cleaner F1.
■ Locations and Cycle for Cleaning
For details on the cleaning the ADF, refer to "3.2 clean-
ing the ADF" in fi-4530C Operator’s Guide on the Setup
CD-ROM".
The glass of the inside of the
ADF becomes hot during opera-
tion.
When you clean the inside of the
scanner, turn off the power and
unplug the AC adapter from the
outlet and wait for at least three
minutes.
Do not turn off the scanner when
you clean the Feed rollers or
Eject rollers.
Cleaning
Materials
Parts No. Remarks
Cleaner F1
(or isopropyl
alcohol)
CA99501-
0013
1 bottle
Moisten a cloth with
this fluid and wipe the
scanner clean.
Lint-free dry
cloth
- Commercially available one
Part to clean Standard Cleaning Cycle
Pad ASSY Clean these parts after every
5,000 scans.
Pick roller
Feed rollers
Plastic rollers
Eject rollers
Sheet guides
Glass
Ultra sonic sensor
ATTENTION
The scanner must be cleaned more fre-
quently if you scan any of the following
type of sheets:
• Documents of coated paper
• Documents that are almost com-
pletely covered with printed text or
graphics
• Chemically treated documents such as
carbonless paper
• Documents containing a large amount
of calcium carbonate
• Handwritten documents
