DVI 104 Tx/Rx • User’s Guide
DVI 104 Tx/Rx, cont’d
4
Rear panel features
Male Connector
13 68
17 19 22 249
3
c
A single-link DVI-D male connector is used to connect the
transmitter to the source and the receiver to the output device.
Pin Signal Pin Signal Pin Signal
1 TMDS Data 2- 9 TMDS data 1- 17 TMDS data 0-
2 TMDS Data 2+ 10 TMDS data 1+ 18 TMDS data 0+
3 TMDS Data 2
shield
11 TMDS data
shield
19 TMDS data
shield
6 DDC clock 14 +5 V power 22 TMDS clock
shield
7 DDC data 15 Ground (+5V) 23 TMDS clock+
8 CEC control 16 Hot plug
detect
24 TMDD clock -
Top panel features
d
LED — Both the transmitter and receiver have an LED that
lights blue when the unit is receiving power. The LED on the
transmitter also functions as a status indicator for the EDID
minder feature.
e
Thumbscrews — When the male DVI-D connector from the
transmitter or receiver is plugged into the female connector on
the source or display, the connection can be held securely by
tightening the thumbscrews.
