A SERVICE OF

logo

DVI 104 Tx/Rx • User’s Guide
9
Screen is distorted or displays noise
Ensure that the cable length does not exceed 1,640' (500 m).
Ensure that the cables are high quality Multi Mode cable
and are terminated with securely tting plugs.
Ensure that the graphic resolution is correctly set (see
“Setup and Operation”).
View the “Display Properties” of the source device to check
the output resolution. The resolution and refresh rate must
match the capabilities of the display device and must not
exceed 1920 x 1200 at 60 Hz.
Try resetting the system by unplugging and reconnecting
the DVI connectors or the power jacks.