EDR910_1610_ma_en_rev1 00 - 25 -
(7) END DATE: End of daylight saving time
Select month: Use the JOG to adjust the month:
Select week: Use the JOG to adjust the week of the selected month:
Select day: Use the JOG to adjust the weekday:
Adjust switching time: Select the switching time (FROM) and the new time (TO).
Central Europe daylight saving time adjustment:
- Last Sunday of March: Adjustment from 02:00 a.m. to 03:00 a.m.
- Last Sunday of October: Adjustment from 03:00 a.m. to 02:00 a.m.
(8) TIME SYNCHRONISATION:
The DVR offers time synchronisation via NTP server.
ATTENTION: The synchronisation should be activated by selecting “ON” only after
defining the daylight saving time, time zone and NTP server IP address.
(9) TIME SERVER:
The NTP server time synchronisation requires a TCP/IP connection to this server. For
information about the required settings, please refer to “NETWORK” menu.
NTP server identification:
Time servers available on the internet can be identified as follows:
1. Connect your PC to the internet.
2. Open the “DOS prompt” (directory ACCESSORIES or path START>RUN>command)
3. Enter the command:" ping pool.ntp.org " (see screenshot)
4. If the connection is successful, the server IP address is displayed.
F
