Extra controller options with EVE/NET
When an Orville is being controlled by a remote, a number
of extra controller options appear on the controller (mod
con or assign) setup screens. These can be used to add
further remote control options for preset or system
parameters.
Ü See Orville User Manual for more information on Controllers.
The choice of extra controllers will vary with the remote, but usually include:
user key the USER key on the remote panel.
Ü The remote panel on page 8.
joy wheel 1-4 joysticks connected to the remote’s joystick connector.
joy button 1-4 buttons on joysticks connected to the remote’s joystick connector.
Ü Using a Joystick on page 10.
encoder but 1-8 buttons on the remote’s encoder knobs. These may be useful as triggers
or extra push buttons. If these are to be used, set load holdoff to a high
enough value that stored setups will not be loaded accidentally.
Loading Setups on Orville using the Encoder Buttons on page 10.
If one of these extra controllers is used to remote control a preset or system parameter, and the
system is powered down, and later powered up without a remote being connected, it will be displayed
as unavailable until the Orville is next selected by a remote.
EVE/NET Remote User Manual
Document 141044
Release 1.0 Page 6 of 20
