81
Printing with Epson Drivers for Windows | 81
2. Select Roll Paper or Roll Paper (Banner) from the Source list.
The
Roll Paper (Banner) setting allows you to print a series of
continuous images without any margin space between them. This
option is not available with all applications.
When you select
Roll Paper (Banner), you can also select the Save
Roll Paper
option, which saves paper by not feeding the blank portion
of the last page of your document.
3. If you want to print without margins, click
Borderless. Note that
borderless printing takes longer than normal printing. See page 82 for
more information about borderless printing.
Click
Expansion, choose Auto Expand or Retain Size, then click OK.
• Auto Expand enlarges your image (up to 3%) to fit the size of the
paper. You can use the slider to adjust the expansion. Choose
Min
for the least amount of image expansion (with a chance that there
will be small borders around the edges) or
Max for the greatest
amount of expansion (some of the image will be cut off around the
edges, but it will extend to the edge of the paper).
• Retain Size prints your image at the size you specify in your
application. You need to size it slightly wider than the paper width if
you want to print without borders.
4. Click
Roll Paper Option, choose one of the following Auto Cut
settings, then click
OK.
•Off disables automatic cutting. Choose this setting if you want to
operate the cutter manually, print multiple print jobs without
cutting, or if you are printing on heavy media that must be cut by
hand. See page 48 for instructions on operating the cutter manually.
•Single Cut causes the images to be printed end-to-end and saves
paper. With borderless printing, you may see a sliver of the previous
or next image.
•Normal Cut allows margin space at the top and bottom of each
image.
• Double Cut extends the space between images and trims each print
individually. This provides the cleanest edge for borderless printing.
