A SERVICE OF

logo

The HBAnyware Utility User Manual Page 35
Viewing Target Mapping (Linux)
Use this tab to view target mapping. The Target Mapping tab is read-only.
To view target mapping:
1. Select Host or Fabric sort.
2. Select the HBA in the discovery-tree whose target mapping information you wish to view.
3. Select the Target Mapping tab.
Figure 24: Target Mapping tab
Target Mapping Field Definitions
Current Settings Area
Active Bind Type -N/A
Automapping - N/A
Current Mappings Area
This table lists current mapping information for the selected HBA.
Persistent Binding Configuration Area
•N/A
Display Mode Radio Buttons
•N/A
Target Mapping Buttons
•N/A
Note: Persistent binding is not supported by the Linux 2.6 kernel or by the Emulex version 8 driver for Linux.