A SERVICE OF

logo

0
ENGLISH
Remote
Control
Playback
(Advanced)
Connections
Simple
Version
Multi-
zone
GUISettings
Getting
Started
Troubleshooting
Other
Information
Spec. Index
Part
Names
Playback
(Basic)
Playback
(Basic)
Playing Blu-ray Disc and
DVD-Video
1
Prepare for playback.
q Turn on the TV and subwoofer power.
w Change the TV input to the input of this unit.
2
Press ON to turn on power to the
unit.
Front
Rear
3
Insert a disc.
Press 5 on the main unit to open/close
the disc tray.
When the disc tray opens, the input
source automatically switches to “BD/
SD” and the unit enters “Disc Mode”.
If a disc is already inserted in the
disc tray, switch to “Disc Mode” by
selecting BD/SD.
4
Make the various settings for
playback on the disc menu.
uio p················································Select
ENTER·················································· Confirm
You can make the following settings on the
disc menu. (Settable items vary depending
on the disc.)
Subtitle language
Audio language
Audio format etc.
During DVD-Video playback, press TOP MENU
or POPUP/MENU to display the menu.
If the menu continues, press uio p to
get to the next part.
5
Press uio p in the Top Menu screen to select the
title or chapter.
If you use 1 – 9, +10 to select the chapter or title, you can start
playback.
With Blu-ray Disc, depending on the disc, you can select title and
chapter from the popup menu.
6
Press ENTER.
Playback starts.
Adjusting the Master Volume (vpage 28)
Press VOL df.
Stop Playback (Resume Function) (vpage 28)
Press 2.
Pause Playback (vpage 28)
Press 3.
Step-by-Step Playback (vpage 28)
During pause, press 3.
Fast Forward/Fast Reverse Playback (vpage 29)
During playback, press 6 7.
Slow Forward/Slow Reverse Playback (vpage 29)
During pause, press 6 7.
Skipping to the Chapter (vpage 29)
During playback, press 8 9 or ui.
Repeat Playback (vpage 29)
Press REPEAT.
Switching Audio (vpage 30)
During playback of a Primary Audio/Secondary Audio title, press 
AUDIO/RDS.
NOTE
When playing back a high-quality signal such as Dolby TrueHD, Dolby
Digital Plus, or DTS-HD, set the “BD Audio Mode” (vpage 58) to
“HD Audio Output”.
n
n
n
n
n
n
n
n
n
Selecting the Input Source
Press the input source select button
(BD/SD, HDMI, TUNER, USB, AUX) to
be played back.
The desired input source can be selected
directly.
Front
You can also use the following operation to select an input
source.
Using the “Source Select” Menu
q Press SOURCE SELECT.
Display the “SOURCE SELECT” menu.
SOURCE SELECT
Source
HDMI2
Recent
BD/USB
HDMI
Tuner
AUX
Enter
Move
Recently used sources
Selectable sources
The currently selected input source
is highlighted.
w Use uio p to select the input source
icon, then press ENTER.
The input source is set and the source
selection menu is turned off.
Front
is displayed when using a Control dock for iPod.
When using with an iPod connected directly to the USB port of this
unit, select “USB” for the input source.
To turn off the source selection menu without selecting an input
source, press SOURCE SELECT again.
Using the Button on the Main Unit
Press SOURCE.
Each time the button is pressed, it switches to the next
input source.
BD/SD
HDMI1
HDMI2
HDMI3
FMAMAUX1(DOCK)AUX2 USB
z z
If the TUNER “(FM or AM)” is selected in ZONE2,
only the same band as in ZONE2 is displayed.
z
The icons show the category of
content applicable to each operation.
Video Audio Photo
For details of the media corresponding to each icon, see “Playable Media”
(vpage 19).