Getting Started Connections Settings Playback Remote ControlMulti-zone Information Specifications
Symptom Cause / Countermeasure Page
“CHECK XM
TUNER” is
displayed.
• The XM Mini-Tuner is not installed or not fully seated in the XM
Mini-Tuner Dock or the XM Mini-Tuner dock is not connected to
the AVR-4310CI. Confirm the XM Mini-Tuner is fully seated in the
dock and check the XM Mini-Tuner dock cable is connected to the
AVR-4310CI.
18
”CHECK ANTENNA”
is displayed.
• The XM antenna is not connected to the XM Mini-Tuner Dock or
the XM antenna cable is damaged. Check that the XM antenna
is securely connected to the XM Mini-Tuner Dock and check the
antenna cable for damage. Replace the XM antenna if the cable is
damaged.
18
”NO SIGNAL” is
displayed.
• The signal cannot be received. Reposition your XM Mini-Tuner
and Home Dock antenna.
–
”OFF AIR” is
displayed.
• The selected channel is not currently broadcasting. Select another
channel.
–
Receiving only XM
channels 0 and 1.
• The XM Mini-Tuner is not activated. Contact XM Radio. –
“XM - - - ” is
displayed.
• The selected channel is not available. The channel may have been
reassigned to a different channel number. This message may
occur initially with a new radio or a radio that has not received
XM’s signal for an extended period. Consult the latest channel
guide at www.xmradio.com or www.xmradio.ca for the current
list of channels. For cases of a new radio or a radio that has not
received XM’s signal for an extended period, allow the radio to
receive the XM satellite signal for at least 5 minutes and then try
to select the channel again.
–
“CH UNAVAILABLE”
is displayed.
• Channel is not present. Select another channel. –
“CH
UNAUTHORIZED” is
displayed.
• You selected an XM channel that is blocked or cannot be received
with your XM subscription package. Consult the latest channel
guide at www.xmradio.com or www.xmradio.ca for the current
list of channels. For information on receiving this channel, visit
www.xmradio.com or www.xmradio.ca contact XM Satellite
Radio at 1-800-967-2346 or 1-877-438-9677.
–
“UPGRADE XM
TUNER” is displayed.
• The connected XM Mini-Tuner is not compatible with the AVR-
4310CI. Please use an XM Rev4x-compatible XM Mini-Tuner.
–
GXM Satellite RadioH
Symptom Cause / Countermeasure Page
“CHECK SIRIUS
TUNER” is displayed.
• The SiriusConnect Home Tuner unit is not connected. Check that
the connections are correct.
19
”ANTENNA ERROR”
is displayed.
• The antenna is not connected. Check that the connections are
correct.
19
”NO SIGNAL” is
displayed.
• The signal cannot be received. Reposition the antenna. –
”INVALID CHANNEL”
is displayed.
• Channel is not present. Select another channel. –
”ACQUIRING
SIGNAL” is displayed.
• The signal cannot be received. Reposition your SiriusConnect
Home Tuner and Home Dock antenna.
• Displays while SiriusConnect Home Tuner is connected. Reposition
your SiriusConnect Home Tuner and Home Dock antenna.
–
–
”Call SIRIUS”
z
is
displayed.
• Channels are not subscribed to. If you subscribe to the channel,
you can receive the channel.
–
”SUBSCRIPTION
UPDATED” is
displayed.
• While updating contract information. –
”Enter Lock Code
[ ]” is displayed.
• Selected channels are locked. Please insert pass word (4 digits)
into “[ ]”.
–
z: After scroll displays “Call 888-539-
....
” twice, displays “Call SIRIUS”.
GSIRIUS Satellite RadioH
Restoring All the Settings to as They were at the
Time of Purchase (Resetting the Microprocessor)
Perform this procedure if the display is abnormal or if operations cannot be performed.
When the microprocessor is reset, all the settings are reset to their default values.
1
Turn off the power using <POWER>.
2
Press <POWER> while simultaneously pressing <STANDARD> and <DSP
SIMULATION>.
3
Once the display starts ashing at intervals of about 1 second, release the two
buttons.
If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.
Troubleshooting
