A SERVICE OF

logo

Open as PDF
next previous
Installing Your Phone
Connecting the Handset
Cisco Small Business SPA525G and SPA525G2 SPCP IP Phones User Guide 22
2
Connecting the Handset
STEP 1 Find the longer end of the coiled phone cord. Insert it into the back of the phone
base in the slot marked with a phone symbol. This port is labeled #5 on Figure 2.
STEP 2 Insert the short end of the handset cord into the jack at the bottom of the handset
(not shown).
Figure 2 Cisco SPA525G and SPA525G2 IP Phone Connections