Getting Started
Using Phone Hardware and Accessories
Cisco Small Business SPA525G and SPA525G2 SPCP IP Phones User Guide 15
1
Using Phone Hardware and Accessories
Using the Speakerphone
The IP phones provide a speakerphone. To use the speakerphone, press Speaker
(the handset can be either on or off hook).
Using Wired and Wireless Headsets
The SPA IP phones support headsets from different manufacturers. For the latest
supported models, contact your reseller. Additional information can be found at
the manufacturer websites.
Connecting the Headset
Each brand and type of headset might require different steps to establish a
connection. Consult the documentation for your particular headset for more
information:
• Bluetooth headsets—See the “Connecting Bluetooth Headsets” section
on page 16.
• Wireless (non-Bluetooth) headsets (such as Plantronics or Jabra)—Follow
the instructions for your product to connect the phone to the wireless
headset base.
• Wired headsets—Connect the 2.5mm connector from the headset into the
headset port on the right side of the IP phone.
• Electronic Hookswitch (EHS)—Some headsets enable you to answer and
end phone calls by using controls located on the headset.
