A SERVICE OF

logo

Open as PDF
next previous
Operating Instructions
{dF.SE} - Fixture Reset (excludes Pan & Tilt)
This function will re-initialize the fixture with exception of the Pan and Tilt motors.
F
UNCTION SET TO NOTES
Off Normal
dF.SE
On Reset unit
{LP.ti} – Lamp Time
The (lamp time) readout displays the number of hours the lamp has been in use. It is not uncommon
to find new fixtures with a few logged hours. This means the fixture was thoroughly tested prior to
delivery.
1. Press the [◄ ME
NU] button until the display reads “ΛΠ.τι”.
2. Press [▼SELECT] butto
n to read the number of hours used.
3. Press both [▼▲
SELECT] buttons at the same time to reset the lamp counter to zero if changing
a lamp.
{Fi.ti} – Fixture Timer
The (Fixture Timer) readout displays the total number of operating hours of the fixture. It is not
uncommon to find new fixtures with a few logged hours.
Self Demonstration
{dEMo} – Self-demo
This function will execute the built-in program in the fixture.
F
UNCTION SET TO NOTES
Off Normal
dEMo
On Run self-demonstration
{SoFt} – Demo speed
You can set the pace of the demo to either quick or fast.
F
UNCTION SET TO NOTES
Off Quick paced
SoFt
On Slow paced
LEG-6000 User Manual 13 Revision: 2007-03-06/09:06