62
This section explains how to configure advanced settings for a wireless LAN connection
between the Data Projector and a computer.
z All of the operations in this section assume that you have already configured the settings
under “Wireless LAN Connection Basics” (page 50).
z For details about projection operations after establishing a connection, see “Using Wireless
LAN for Projection” (page 88).
Web Setup
In order to modify the settings of a Data Projector manual setup profile and to configure
advanced settings of other Data Projector settings, you need first to display a special web
browser page named “Web Setup” on you computer screen. To display Web Setup, use a
web browser running on a computer that is connected to the Data Projector over a
wireless LAN.
To display and log into the Web Setup page
1
On the Wireless Connection window of the computer that is connected to the
Data Projector over a wireless LAN, click the button.
z This will start up the computer’s default browser and display an initial page like the one
shown below.
Advanced Wireless LAN Connection Settings
