A SERVICE OF

logo

Replacing the Printhead
17
6-17
z To prevent poor printing results, never touch the exposed nozzles (e) or electrical
contacts (f) on the printhead. The below illustration represents the insertion surface
facing upward.
z Never try to re-attach the protective caps or packing material removed from the
printhead. Discard these items immediately in compliance with local regulations
regarding the disposal of such items.
13
With the nozzles facing down and the electrical contacts facing in,
insert the printhead gently into the carriage below.
Make sure that the nozzles are not touching the carriage and the printhead is
inserted completely.
14
Pull the printhead lock cover toward you and lower it completely until
it locks.
e
f