Adjusting the Amount of Line Feed
37
7-37
Important
Adjusting the Amount of Line Feed
If you notice white or dark lines in your prints, print an LF setting pattern
and adjust the amount of media feed. Before printing the LF setting pattern,
load LF Adjust Paper provided with the printer or A4 or letter size High
Resolution Paper (HR-101S) in Cassette 1.
z Always load A4 or Letter size media in Cassette 1. If a smaller size is loaded, it
may smear ink inside the printer and onto other media.
z You do not need to select the media size on the operation panel. The media is force
fed from Cassette 1 to print the pattern.
1
Press the Power button to switch the printer on.
After a few seconds “Ready” is displayed in the operation panel and the
Online lamp lights.
2
Press the Online button to switch the Online lamp off.
The printer is set offline.
