162
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, M, C1, and
C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Registering Image Sync to the < > Button
By registering Image Sync to the < > button, you can simply press the
< > button to send any unsent images on the memory card to a computer
via CANON iMAGE GATEWAY. For details on Image Sync, see “Sending
Images Automatically (Image Sync)” (=
163).
1 Prepare the camera.
z Register [ ] as the destination (=
142
– 144).
z Install the software on the destination
computer, and configure the camera
settings (=
161).
2 Press the < > button.
3 Choose the destination.
z Press the <q><r> buttons or turn the
<7> dial to choose [
], and then press
the <m> button.
z The camera will automatically reconnect
to any previous access points and send
the images (=
163).
z From now on, you can simply press the
<
> button to send images.
3 Establish the connection.
z Connect to the smartphone as described
in steps 5 – 9 in “Connecting to WPS-
Compatible Access Points” (=
151) or
steps 4 – 6 in “Connecting without an
Access Point” (=
155).
z After a connection is established with the
smartphone, the smartphone nickname
is displayed on the camera. (This screen
will close in about one minute.)
z You can now use the smartphone to
import images from the camera. (The
camera cannot be used to send images
to the smartphone.)
z Use the smartphone to end the
connection; the camera will automatically
turn off.
z From now on, you can simply press the
<
> button to connect to the registered
smartphone.
• When you are in the vicinity of an access point that you have
previously connected to, the camera will automatically connect
to it in step 2. T
o change access points, select [Switch Network]
from the screen that will be displayed when the connection is
being established, and follow steps 5 – 9 in “Connecting to WPS-
Compatible Access Points” (=
151).
• All images in the camera can be viewed from the connected
smartphone. Note that if you have assigned the < > button, [View
Settings] (=
156) is not available.
• One smartphone can be registered to the < > button. If you wish to register a
different smartphone, clear the one currently registered (=
163) first.
