Setting Up Polling Sending
8-20
8
Using Polling
CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0
Changing the Polling Box Settings
Follow this procedure to change the settings of the polling box setup file.
1
Open all three one-touch speed dialing panels ➞ press [Data
Registration] ➞ [
▼] or [▲] until <3.FAX SETTINGS> appears ➞
press [Set].
If necessary, see steps 1 to 3 of “Setting Up a Polling Box,” on p. 8-14.
2
Press [▼] or [▲] until <6.FILE SETTINGS> appears ➞ press
[Set] ➞ [
▼] or [▲] until <4.POLLING BOX> appears ➞ press
[Set].
If necessary, see steps 4 and 5 of “Setting Up a Polling Box,” on p. 8-14.
3
Press [▼] or [▲] until <2.CHANGE DATA> appears ➞ press
[Set].
4
Enter the two digit number of the polling box that you want to
change using the numeric keys ➞ press [Set].
You can also press [▼] or [▲] to select the polling box number.
5
Enter the password (up to seven digits) using the numeric
keys ➞ press [Set].
If you have not previously set a password, skip this step, and proceed to step 6.
➞
➞
➞
Set
Data
Registration
Set
Set
4
1
7
5
2
8
6
3
9
0
Set
4
1
7
5
2
8
6
3
9
0
Set
