Using Regular Dialing
3-8
Sending Documents
3
CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0
Using Regular Dialing
When you come to a step that requires dialing a number, you can dial the number
with the keys on the numeric keypad, just like you would when dialing a telephone
number. This is called “regular dialing.”
NOTE
To make dialing easier, register frequently used numbers to the one-touch speed dialing
keys or coded speed dialing codes. (See “Using Speed Dialing,” on p. 2-32.)
1
Place your documents on the machine.
For instructions explaining how to place your documents, see “Setting the
Document on the Machine,” on p. 3-3.
NOTE
• You can adjust the resolution, contrast, and document type for scanning. (See
“Adjusting the Scan Settings,” on p. 3-4.)
• You can also specify a sender’s name with [TTI Selector]. (See “Selecting a
Sender’s Name,” on p. 3-6.)
2
Dial the telephone number using the numeric keys.
NOTE
• When entering a number using regular dialing, if you see that you have entered an
incorrect digit, press [Delete] to delete the rightmost digit
➞
enter the correct digit.
• You can also use (Clear) to clear the entire telephone number
➞
begin
entering the telephone number again.
• If you notice that you made a mistake while the machine is dialing the number,
press
(Stop) to return to the Standby mode
➞
start again.
3
Press [Start].
The machine starts scanning the first page into memory.
4
1
7
5
2
8
6
3
9
0
C
Start
