When a Message Is Displayed
6-11
6
Troubleshooting
PDL UFR II DL Mem. Full Error Skip
Cause There is not enough memory to register the character set.
Remedy 1 Set the Graphics Mode in the UFR II printer driver to 'Raster Mode' and print the
data again. (See the Help function on the UFR II printer driver.)
Remedy 2 After canceling the print job, reset the printer to increase the amount of
available memory and print again. (Note that print data in memory such as
secured print jobs and any jobs being processed will be deleted.) (See "Reset
Printer," on p. 3-62.)
Remedy 3 Perform [Error Skip] and continue printing. However, the data will not be printed
correctly.
NOTE
If 'Auto Continue' is set to [On], this error is skipped automatically. (See "Auto Continue,"
on p. 3-21.)
PDL UFR II Invalid Data
Cause An error occurred while processing data in UFR II custom mode.
Remedy After canceling the print job, try printing again with a printer driver version that is
compatible with the machine.
PDL UFR II Layout Error Error Skip
Cause The page layout cannot be processed due to lack of memory.
Remedy 1 Set the Graphics Mode in the UFR II printer driver to 'Raster Mode' and print the
data again. (See the Help function on the UFR II printer driver.)
Remedy 2 After canceling the print job, reset the printer to increase the amount of
available memory and print again. (Note that print data in memory such as
secured print jobs and any jobs being processed will be deleted.) (See "Reset
Printer," on p. 3-62.)
Remedy 3 Perform [Error Skip] and continue printing. However, the data will not be printed
correctly.
NOTE
If 'Auto Continue' is set to [On], this error is skipped automatically. (See "Auto Continue,"
on p. 3-21.)
