Printing Directly Using the Command Prompt
5-33
5
How to Use the Direct Print Function
Printing Directly Using the Command Prompt
You can print directly by entering the LPR command in the command prompt.
For commands, settings specified by the command prompt or touch panel display
are available.
Specifies from the command prompt
You can specify LPR command settings with the P option, where each item is
separated with an underscore ( _ ). The following commands are supported with
this machine.
Command example (with Paper Size as "LETTER," Layout as "DUPL," and Copies
as "20"):
Input Example : lpr -S <IP Address> -P LETTER_DUPL_C20 <file name>
NOTE
If settings have not been specified from the command prompt, settings in the touch panel
display will be enabled.
Specifies from the touch panel display
The two settings that are available with the Direct Print function are 'Settings Menu'
and 'PDF 1.5 Settings Menu'.
For more information, see "Settings Menu," on p. 3-9 and "PDF1.5 Settings," on p.
3-58.
Item Command
Paper Size LETTER, LEGAL, LEDGER (11" x 17"), A3, A4, A5, B4, B5
Layout
SIMP (One-sided), DUPL (Two-sided/Long Edge),
DUPS (Two-sided/Short Edge)
Copies C<Number of copies>.
